Although Furniture Mould design is carried out under the expected process conditions when selecting molding materials and molding equipment, people's understanding is often imperfect. Therefore, after the furniture mould is processed, a mold test must be performed to observe the molded part.
Plastic parts have many types of defects and the reasons are complex. There are mold reasons and process conditions, and the two are often together.
Before repairing the furniture mould, it should be carefully analyzed according to the actual situation of the defects of the plastic parts. After finding out the cause of the defects of the plastic parts, a remedy should be proposed. Since the molding conditions are easily changed, it is usual to first change the molding conditions, and when the molding conditions cannot be solved, the mold is considered to be repaired.
It is more cautious to repair furniture mould, and it is not easy to act rashly. The reason is that once the mold conditions change, it is impossible to make major modifications and restore the original state. No matter how good the performance of the part, the only way to improve the quality of the mold.
After the furniture mould has been tested, if it is not used for a period of time, the furniture mold residue, dust, oil, etc. should be thoroughly wiped off, coated with butter or other anti-rust oil or rust inhibitor, and stored in the storage place.
