Mold information

What Are The Two Parts of The Air Cooler Mould

Update:03-09-2019
Summary:

Injection moulding of Air Cooler Mould is a processing […]

Injection moulding of Air Cooler Mould is a processing method used in mass production of some parts with complex shapes. The specific principle refers to the heated and melted plastic raw materials are pushed by the screw of the injection moulding machine and injected into the mould cavity of the air cooler mould under high pressure, and the plastic formed products are obtained after cooling and curing.

The air cooler mould consists of a moving mould and a fixed mould, the moving mould is installed on the moving template of the injection moulding machine, and the fixed mould is installed on the fixed template of the injection moulding machine. During injection moulding, the movable mould and the fixed mould are closed to form a gating system and a mould cavity, and during mould opening, the movable mould and the fixed mould are separated to take out plastic products.

Although the structure of the air cooler mould may vary greatly due to the variety and performance of plastics, the shape, and structure of plastic products and the type of injection machines, the basic structure is the same. The air cooler mould is mainly composed of a gating system, temperature control system, moulding parts, and structural parts. Among them, the gating system and moulding parts are the parts that are in direct contact with the plastic and change with the plastic and products. They are the most complicated and most changeable parts in the plastic mould, requiring the highest finish and precision.

Air cooler mould is a tool for producing plastic products, and it is also a tool for giving plastic products complete structure and precise size. Injection moulding is a processing method used in the mass production of some parts with complex shapes. Specifically, the plastic melted by heat is injected into the mould cavity under high pressure by an injection moulding machine, and the moulded product is obtained after cooling and curing.