The wall thickness of the Household Product Mould has a great influence on quality. If the wall thickness is too small and the flow resistance is large, it is difficult to fill large and complicated h...
11-04-2019For the Dustbin Mould, the most effective cooling method is to pump the coolant through the cooling passage to the molten plastic into the dustbin mold. This method is used for pressure casting and us...
09-04-2019The design of the cooling system is very important in injection moulding. This is because the moulding of the plastic product is only cooled to a certain degree of rigidity, and then the plastic produ...
16-04-2019Daily Necessities Mould heat removal usually takes a long time and has the greatest direct impact on cycle time. The daily necessities mould cooling channel blueprint often becomes an afterthought in ...
18-04-2019Proportional thickness criteria must be observed when constructing ribs and gussets. Longer cycle times can be expected if the ribs or gussets are also relative to the voids, component walls, sinking,...
23-04-2019Fundamentally, the design of t...
Although Furniture Mould desig...
Dark spots appear not only at ...
Taizhou Huangyan Rongwei Plastic Mould Co.,Ltd.is located in Huangyan,which is the mould town in China.
Copyright © TAIZHOU HUANGYAN RONGWEI PLASTIC MOULD CO.,LTD. All Rights Reserved. Powered by: HWAQ