In modern industry, most Dustbin Mould need polishing, because polishing can improve the appearance of products and raise a grade. In dustbin mould polishing industry, demolding can be easier, which can promote factory processing and save costs. After polishing the common dustbin mould, users need electroplating, and the wear resistance and corrosion resistance of the electroplated dustbin mould can be greatly improved.
The polished product has low surface roughness, high flatness and high finish, so the surface of the produced plastic parts is brighter, just like the cosmetics on the product.
Attention should be paid to the polishing details of the dustbin mould: the polishing environment of the dustbin mould should be carried out in a clean and ventilated place, because hard dust can easily penetrate into gypsum and damage and wear good surfaces; The polishing of the dustbin mould should start from angle, edge, sheet or injection moulding. Each polishing tool is only suitable for one kind of drilling gypsum, and pay attention to dust prevention.
Each time the drill bit is replaced, the hand and workpiece should be cleaned and the polishing pressure adjusted to match the hardness of the polishing tool and the size of the drilling gypsum. For the best gypsum, the pressure is only as great as the weight of the polishing tool.
