Proportional thickness criteria must be observed when constructing ribs and gussets. Longer cycle times can be expected if the ribs or gussets are also relative to the voids, component walls, sinking,...
23-04-20191. The design and manufacturing cost of each Air Cooler Mould must be summed up in time: through the effective control of the workshop, effectively control the scrapping of the work order, through acc...
25-04-2019In production, it is often encountered that a heating coil is damaged or the heating control portion is out of control, and the temperature of the dustbin mould is drastically changed to cause chromat...
30-04-2019The temperature difference between the melt and the Household Product Mould should not be too large to prevent the glass fibers from accumulating on the surface as the melt fills to cool and form the ...
07-05-2019Although the Air Cooler Mould design is carried out under the expected process conditions when selecting moulding materials and moulding equipment, people's understanding is often not perfect, so it i...
09-05-2019Dark spots appear not only at ...
Even when the melt enters the ...
The wall thickness of the Hous...
Taizhou Huangyan Rongwei Plastic Mould Co.,Ltd.is located in Huangyan,which is the mould town in China.
Copyright © TAIZHOU HUANGYAN RONGWEI PLASTIC MOULD CO.,LTD. All Rights Reserved. Powered by: HWAQ